BUILDTAK 3D PRINT SURFACE - 235 X 235 MM

Product category: Product brand: Buildtak
BUILDTAK 3D PRINT SURFACE - 235 X 235 MM

BUILDTAK 3D PRINT SURFACE - 235 X 235 MM

Reviews

Price 12,90 €

BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.

Availability
In stock


BuildTak Offers The Following Benefits

  • Works great with ABS, PLA and more without the need to change the surface. And no more pretreatments such as hairspray or acetone slurry!
  • Easy installation to the bare print bed and clean removal without adhesive residue.
  • Durable and with optimal care can last for many hours of use while providing extended protection to the original print bed surface.
  • Creates an optimal bond between the 3D printed object and the build surface for the duration of the print while preventing curling. When builds are complete, the 3D printed object can be cleanly removed with minimal prying or scraping.
  • Patent-pending heat resistant composition, developed to withstand the typical temperatures used on heated print beds (i.e. 110-125C). With safety in mind, BuildTak is composed of raw materials that are UL flame rated.
  • BuildTak Just Works!

Key Features:

  • Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface
  • Installs much easier than masking tape or films typically used and with fewer chances of air bubbles
  • Protects build plate
  • Heat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface
  • Creates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.

FAQ -

Frequently Asked Questions

What is BuildTak?
BuildTak is an ideal 3D printing surface for FFF 3D printers. We believe it offers a superior alternative to using masking tape or heat resistant films (such as kapton) on your FFF 3D printers build plate. BuildTak is a proprietary, patent-pending composition that comes in pre-cut, specially textured plastic sheets that adhere to your build platform with its heat-resistant adhesive backing.

Why we think BuildTak is superior over masking tape and heat-resistant films?
if you have ever dealt with either masking tape or kapton, one of the more common features you will notice is that the BuildTak sheets are more rigid and therefore much easier to install or apply to the bare build plate and much less susceptible to air bubbles getting trapped beneath the surface.

BuildTak is found to be more durable in nature so it can be more effective in protecting the build plate and with proper use can significantly outlast the typical cycle time of either kapton or masking tape.

Generally does not require any special treatment or finessing (ie. the use of hair spray, acetone slurry, printing rafts, etc). Once you have the crucial step of setting nozzle height just right, BuildTak just works. Through our experience we find that 3D printed objects stay put on the build surface for the duration of your build with fewer chances of curling. When the builds are complete, we find that builds pop right off with significantly less prying than what you are probably used to using these other alternatives.

BuildTak works for both ABS and PLA, which means if you are using a printer that can print in either of these materials it is not necessary to change the surface between builds. Heated print beds are not a problem, BuildTak is composed of high quality raw materials and is designed to withstand the high temperatures of a typical FFF 3D printer (i.e. 110-125C heated print bed)

If/when you are ready to replace the BuildTak sheet, it comes off clean and easy in one piece, leaving no residue behind from the adhesive.

How do I use BuildTak?
1. Wipe down your bare build platform making sure it is clean and free of debris
2. Trim the BuildTak sheet down to the size of your build plate (if not already)
3. Remove the white adhesive liner and apply the BuildTak sheet to your bare build plate. Start from one edge of the build plate and work your way to the other edge, smoothing the BuildTak sheet with a credit card or decal applicator as you go
4. Re-level your surface, making sure the nozzle heights are properly set to the approximate thickness of a standard piece of office paper. The key to a successful BuildTak experience is a level print bed and finding that nozzle height sweet spot!

What are the best practices to ensure the longevtiy of the BuildTak?
We recommend using a spatula or putty knife with smooth/rounded corners. Avoid using objects with sharp edges or corners that will accelerate the wear and tear of your BuildTak sheet and DO NOT use heavy duty solvents, such as acetone, to clean it, nothing stronger than rubbing alcohol.
Make sure the extruder nozzle for your FFF 3D printer is leveled and is NOT in direct contact with the BuildTak sheet. It is recommended to set your nozzle height to no less than the thickness of a standard sheet of office paper. When trying to achieve an optimal nozzle height, it is better to start with a looser nozzle height, run a test/leveling print and simply decrease the nozzle height in smaller increments until the test prints stick.

What are the best settings for nozzle height and bed leveling?
When it comes to nozzle height, we have found that there is a sweet spot that allows for optimal adhesion/removal of printed parts. When trying to find that sweet spot it is better to start with the nozzle height on the high side and run a test print where you pay close attention to the first layer of the print. You will know right away if the nozzle is too far because the extruded filament will not stick and in that case, no harm done to the sheet. Just reduce the nozzle height slightly and try again until it sticks. For setting the nozzle height (i.e. the distance between your nozzle and the BuildTak sheet) we recommend using the thickness of a standard piece of office paper (or about .1mm) for ABS and a piece of card stock (or about .2mm) for PLA. with just a little bit of friction. Proper leveling should also increase the longevity of the sheet because it will more than likely mean you will not be subjecting it to as much wear and tear in the removal of the object.

Why are my prints not sticking to the BuildTak?
This is generally caused when the extruder nozzle is too far away from the BuildTak sheet, try decreasing nozzle height slightly. Run a test print after each adjustment to confirm.

Why are my prints sticking too well to the BuildTak, making it difficult to remove the builds afterwards?
This can happen when the extruder nozzle is too close to the BuildTak sheet. Try increasing the nozzle height slightly and make sure the print bed is level. Make sure you run a test print. When printing with ABS, try to remove the builds immediately after completion, reheating the heated print bed (for ABS) will also help to release larger builds that are sticking too well. Please note, a heated bed is not required for printing with PLA or removing parts printed with PLA.

What Materials work with BuildTak?
Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface.

Customers who bought this also bought…

Your shopping cart is empty

Terms and conditions

Nämä toimitusehdot ovat voimassa 19.10.2020 alkaen.

Verkkokauppa

Sintosen palvelut
Karhusuontie 236a
02570 Siuntio kk

+358456308568
sales@3dandy.com
3dandy.com
2173756-2

Kauppa myy tuotteita täysi-ikäisille yksityishenkilöille. Tuotteiden hinnat sisältävät arvonlisäveron. Pidätämme oikeuden hintojen ja toimituskulujen muutoksiin.

Tilaaminen

Tuotteet tilataan verkkokaupassa siirtämällä ne ostoskoriin ja maksamalla ostoskorin sisältö verkkomaksupalvelussa. Kaikki asiakastiedot käsitellään luottamuksellisesti. Tilauksen yhteydessä kysyttyjä yhteystietoja ei käytetä muuhun kuin tilauksen toimitukseen tai siinä ilmenevien epäselvyyksien selvittämiseen, ellei erikseen toisin mainita. Tilatessasi verkkokaupasta sinun edellytetään tutustuneen ja sitoutuneen kulloinkin voimassa oleviin toimitusehtoihin.

Maksaminen ja maksutavat

Maksunvälityspalvelun toteuttajana ja maksupalveluntarjoajana toimii Paytrail Oyj (2122839-7) yhteistyössä suomalaisten pankkien ja luottolaitosten kanssa. Paytrail Oyj näkyy maksun saajana tiliotteella tai korttilaskulla ja välittää maksun kauppiaalle. Paytrail Oyj:llä on maksulaitoksen toimilupa. Reklamaatiotapauksissa pyydämme ottamaan ensisijaisesti yhteyttä tuotteen toimittajaan.

Paytrail Oyj, y-tunnus: 2122839-7
Innova 2
Lutakonaukio 7
40100 Jyväskylä
Puhelin: 020 718 1830
www.paytrail.com


Tilaus- ja maksuvahvistus

Kun olemme vastaanottaneet tilauksesi, lähetämme sinulle välittömästi sähköpostilla tilausvahvistuksen, josta näkyvät tilaustietosi. Tarkasta aina tilausvahvistuksen sisältö. Jos sinulla on kysyttävää, ota heti yhteys asiakaspalveluumme. Säästä tilausvahvistus mikäli joudut ottamaan yhteyttä asiakaspalveluun. Asioidessasi asiakaspalvelussa pidä aina mahdollinen asiakasnumerosi ja tilausnumerosi saatavilla. Tarkasta aina, että paketin sisältö täsmää tilausvahvistuksessa olevien tuotteiden kanssa.

Asiakaspalveluumme saat yhteyden seuraavilla tiedoilla:

Sintosen palvelut
Karhusuontie 236a
02570 Siuntio kk

+358456308568
sales@3dandy.com
3dandy.com
2173756-2

Toimitustavat ja -kulut

Toimituskulut sisältävät posti- ja pakkauskulut. Esitämme ostoskorissa arvion tulevista toimituskuluista ensisijaisen käytössä olevan toimitustavan mukaan. Tarkat toimituskulut näet valittuasi tilaukselle haluamasi maksu- ja toimitustavat. Käytössä olevat toimitustavat riippuvat ostoskorin sisällöstä ja yhteispainosta. Voit valita kassalla käytössä olevista toimitustavoista sinulle parhaiten sopivan vaihtoehdon jonka yhteydessä tarkka toimituskulu on esitetty.

Toimitusaika

Yleisimmät toimitusaikamme Suomeen vaihtelevat tilauksesta ja toimitustavasta riippuen. Poikkeukset toimitusaika-arvioihin on kerrottu, jos ostoskorissa on varastosta loppuneita tuotteita ja ilmoitamme myös mahdollisista viivästyksistä teille välittömästi tilaamisen jälkeen.

Emme vastaa ylivoimaisen esteen aiheuttamista viivästymisistä tai viivästysten aiheuttamista välillisistä haitoista. Verkkokauppa tiedottaa sivuillaan poikkeavista toimitusajoista.

Takuu

Tuotteilla on 12 kuukauden takuu, pois lukien resiinit ja filamentit. Takuu ei koske esimerkiksi tulostimen kotelon kulumista tai osien normaalia kulumaa kuten suuttimet lämpövastukset, LCD taulut jne. 

Palautusehdot

Right of withdrawal

You have the right to cancel this agreement within 14 days without giving any reason. The withdrawal period ends within 14 days starting from the day you received the last shipment, or in the case of downloadable products, from the moment you received the order.

In order to exercise the right of withdrawal, you must notify us of your decision to cancel the agreement in an unambiguous way (for example, by mail or by email). You can also use our printable return form, but its use is not mandatory.

To comply with the deadline for withdrawal, it is sufficient that you submit your notice of cancellation before the end of the withdrawal period.

Effects of withdrawal

If you withdraw from this contract, we shall reimburse to you all payments received from you, including the costs of delivery (with the exception of the supplementary costs resulting from your choice of a type of delivery other than the least expensive type of standard delivery offered by us), without undue delay and in any event not later than 14 days from the day on which we are informed about your decision to withdraw from this contract. We will carry out such reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
In connection with the cancellation of the contract, the customer is responsible for the delivery costs arising from the return of the goods. Please also note that there is no right of withdrawal for service products, digital content or customized products. The right of return only applies to consumers, companies / entities do not have the right of return unless otherwise agreed.

You must return the goods without delay and no later than 14 days after informing us about your decision to withdraw from the contract. The deadline is met if you send back the goods before the period of 14 days has expired.

You are only responsible for the kind of value decrease of the goods that did not result from treatment that is required for determining the nature, properties and functionality of the goods.

Lunastamaton paketti

Lunastamatta jättäminen ei ole sama asia kuin palautus tai peruutus. Lunastamatta jätetystä paketista, josta ei ole tehty erillistä peruutusilmoitusta, perimme toimituskustannukset.

Ongelmatilanteet

Mikäli tuote on kadonnut tai vioittunut kuljetuksen aikana tai se ei muuten vastaa tilaustasi, tulee sinun ilmoittaa virheestä viimeistään 14 päivän kuluessa kirjallisesti Peruutusoikeus ja palautusehdot -kohdassa mainittuun osoitteeseen tai soittamalla yhteystiedoissa mainittuun puhelinnumeroon. Jos paketti on selvästi vaurioitunut kuljetuksessa, teidän täytyy tehdä välittömästi asiasta reklamaatio valitsemanne toimitustavan kuljetusyhtiölle.